Personal tools

Difference between revisions of "Ace:Audit Manager Upgrading"

From Adapt

Jump to: navigation, search
Line 15: Line 15:
  
 
; 3. Apply database patches
 
; 3. Apply database patches
: Connect to your mysql database and apply any listed patches in order. You will need to apply all patches starting with your current version (see step 1) *in order*. See the table below for a list of what patches you need
+
: Connect to your mysql database and apply any listed patches in order. You will need to apply all patches starting with your current version (see step 1) *in order*. See the table at the bottom of this page for a list of what patches you need.
  
:Connect to your database and apply the patches using the command 'source patchfile.sql'
+
: To apply the patchec, connect to your database and issue the command 'source patchfile.sql' for each patch file you need to run.
  
 
:Here's an example of what you will see. Depending on which patches you are applying, your screen will look different.
 
:Here's an example of what you will see. Depending on which patches you are applying, your screen will look different.

Revision as of 17:45, 29 April 2009

Upgrade Instructions

There are three steps to upgrading the audit manager, these are upgrading the application code, upgrading the underlying database, and finally updating any configuration files if necessary. The procedure for upgrading is listed below

These instructions are current for version 1.3. Links to all previous versions of ace are available on the software page

1. Note the version you are currently running
Point your web browser at your ACE AM installation and look for the version at the bottom. If should look something like 1.2.2, or 1.3..
2. Stop the Audit Manager/Tomcat
Run TOMCAT/bin/shutdown.sh to stop tomcat
[toaster@loach ~/aceam]$ apache-tomcat-6.0.18/bin/shutdown.sh 
Using CATALINA_BASE:   /fs/narahomes/toaster/aceam/apache-tomcat-6.0.18
Using CATALINA_HOME:   /fs/narahomes/toaster/aceam/apache-tomcat-6.0.18
Using CATALINA_TMPDIR: /fs/narahomes/toaster/aceam/apache-tomcat-6.0.18/temp
Using JRE_HOME:       /opt/jdk1.6.0
3. Apply database patches
Connect to your mysql database and apply any listed patches in order. You will need to apply all patches starting with your current version (see step 1) *in order*. See the table at the bottom of this page for a list of what patches you need.
To apply the patchec, connect to your database and issue the command 'source patchfile.sql' for each patch file you need to run.
Here's an example of what you will see. Depending on which patches you are applying, your screen will look different.
[user@loach ~]$ mysql aceam3 -u aceam -p 
Enter password: 
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 88
Server version: 5.0.45 Source distribution

Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

mysql> source 1.2-1.3.updates.sql;
Query OK, 0 rows affected (0.00 sec)

Query OK, 0 rows affected (0.01 sec)

Query OK, 0 rows affected (0.00 sec)
...
...
Query OK, 0 rows affected (0.00 sec)

mysql> 


4. Upgrade the ACE AM code
Remove the existing ACE installation files and directories located at TOMCAT/webapps/ace-am and TOMCAT/webapps/ace-am.war.
[toaster@loach ~/aceam]$ rm -rf apache-tomcat-6.0.18/webapps/ace-am*
Place a copy of the latest ace-am.war file in TOMCAT/webapps/
[toaster@loach ~/aceam]$ cp /tmp/ace-am.war apache-tomcat-6.0.18/webapps/
The latest version can be downloaded here
5. Update any configuration settings. (Versions prior to 1.3)
In your TOMCAT/conf/Catalina/localhost/ace-am.xml file, you may need to add some settings. This is only needed if you are upgrading from 1.2.2 or earlier.
Add the following lines to your configuration file, after the '<Resource auth....' section.
 <!--Mail server to use when mailing reports. You will need to set this if
 you want reports to be mailed properly.-->
 <Parameter name="mail.server" value="localhost.localdomain"/>
 <!-- Set this e-mail address to an address e-mail should originate from -->
 <Parameter name="mail.from" value="aceam@localhost"/>
These two settings specify a mail server and e-mail address to use when sending out reports. You should change these if the server running ACE does not run a mail server. Check with your sysadmin if you are not sure. On most unix systems, you can just use these defaults. For windows, talk to your system administrator for the correct settings.
There is a sample configuration file available here
6. Restart ACE.
Run TOMCAT/bin/startup.sh to restart tomcat
[toaster@loach ~/aceam]$ apache-tomcat-6.0.18/bin/startup.sh 
Using CATALINA_BASE:   /fs/narahomes/toaster/aceam/apache-tomcat-6.0.18
Using CATALINA_HOME:   /fs/narahomes/toaster/aceam/apache-tomcat-6.0.18
Using CATALINA_TMPDIR: /fs/narahomes/toaster/aceam/apache-tomcat-6.0.18/temp
Using JRE_HOME:       /opt/jdk1.6.0_07


Database Files

Database patches required to bring ace database up to version 1.3.

Current Version Database Update Files
1.0 1.0-1.1.update.sql
1.1-1.2.updates.sql
1.2-1.3.updates.sql
1.1 1.1-1.2.updates.sql
1.2-1.3.updates.sql
1.2 1.2-1.3.updates.sql
1.2.1 1.2-1.3.updates.sql
1.2.2 1.2-1.3.updates.sql