Saleae Logic 8
Jump to navigation
Jump to search
Saleae Logic 8 Logic Analyzer
Description
A logic analyzer is an electronics diagnostic device useful for analyzing or troubleshooting electrical circuits. Like an oscilloscope, it measures voltage over time. While an oscilloscope can capture more fine detail than a logic analyzer, logic analyzers often have more channels and automatic decoding features for common protocols.
The Saleae Logic 8 Supports 8 channels, both of which can be used as analog or digital inputs (selected in the software). Each input pin has a corresponding ground pin below it, as shown in the pin diagram below (the grounds are common).
Out-of-box Supported Protocols:
- SPI
- Serial
- I2C
- Midi
- Atmel SWI
- MDIO
- HDMI CEC
- SWD
- PS/2
- Manchester
- CAN
- LIN
- I2S / PCM
- HD44780
- 1-Wire
- JTAG
- BiSS C
- HLDC
- Modbus
- Parallel
- USB LS and FS
- Addressable LEDs
- SMBus
- DMX-512
- (More protocols are available in the Extensions Marketplace)
Operation
- UNDER CONSTRUCTION**
Using The Logic2 Software
- UNDER CONSTRUCTION**
Links & Software
Saleae Logic Software Download
Saleae - Getting Started
Saleae - User Guide
Located In
Training
No training is required to use this tool.