Cura Help: Difference between revisions

From sandbox
Jump to navigation Jump to search
No edit summary
No edit summary
Line 31: Line 31:
=== Support ===
=== Support ===
Support is used to build up to any part of the print that is overhanging over nothing. It should be used when you have any overhang at more than a 45 degree angle away from the rest of the print. You might need support used even when it is less than 45 degrees, each build is different.  
Support is used to build up to any part of the print that is overhanging over nothing. It should be used when you have any overhang at more than a 45 degree angle away from the rest of the print. You might need support used even when it is less than 45 degrees, each build is different.  
When looking at your print, you can see if it needs support if you look under it and see red coloring.
[[ File:no_support.PNG | border | 350px | none ]]
One check you should always make when printing is checking the support building. This can be done after clicking slice and letting it load, you can click preview on the top bar. This view will show you everything that will be printed from the individual layers to the the support under it. Checking this can make sure you're print wont fail because missing support
[[ File:sliced_support.PNG | border | 350px | none ]]


Two options for support placement:
Two options for support placement:
* '''Support Everywhere''': Support will be printed everywhere you have overhangs, even if support needs to be printed on top of your print
* '''Support Everywhere''': Support will be printed everywhere you have overhangs, even if support needs to be printed on top of your print
* '''Touching Buildplate''': Only print support that would be started on the buildplate.
* '''Touching Buildplate''': Only print support that would be started on the buildplate.

Revision as of 01:22, 26 November 2019

Cura Overview

Cura Controls

Adjusting Models

Move

Cura move.png

Can move the model manually using the arrows or set in specific coordinates (Moving manually much easier)

  • Lock model makes your model not able to accidentally be moved
  • Moving things outside the boundaries set by the specific Ultimaker makes the item be grayed out and won't be printed.
  • The XY coordinates (0,0) refers to the center of the build plate in Cura.

Mirror

Cura mirror.PNG

Flip a model in one of the XYZ directions.

Rotate

Cura rotate.PNG

Turn a model along the XYZ axis designated by circles around model.

  • Automatically rotates at 15 degree angle, holding shift or disabling “Snap Rotation” option lets you rotate at 1 degree
  • Left option is to reset to original and middle is to lay flat – does it’s best to lie it flat based on current rotation, right most is click a side to lay flat

Scale

Cura scale.PNG

Change size of model in one of XYZ directions. Can drag out using the arrows or type in values or percents.

  • Uniform scaling means stay consistent upon all directions
  • Snap scaling means only scale by 1% increments
  • Button is to reset to normal

Support

Support is used to build up to any part of the print that is overhanging over nothing. It should be used when you have any overhang at more than a 45 degree angle away from the rest of the print. You might need support used even when it is less than 45 degrees, each build is different.

When looking at your print, you can see if it needs support if you look under it and see red coloring.

No support.PNG

One check you should always make when printing is checking the support building. This can be done after clicking slice and letting it load, you can click preview on the top bar. This view will show you everything that will be printed from the individual layers to the the support under it. Checking this can make sure you're print wont fail because missing support

Sliced support.PNG

Two options for support placement:

  • Support Everywhere: Support will be printed everywhere you have overhangs, even if support needs to be printed on top of your print
  • Touching Buildplate: Only print support that would be started on the buildplate.