Intro to Sewing Project

From sandbox
Revision as of 23:07, 23 October 2019 by Nstewart7 (talk | contribs)
Jump to navigation Jump to search

This project uses the Crafting Room in the Sandbox Makerspace. In this project I am attempting to create pillows for the yellow chairs in the Sandbox because the seats hurt my but :( This project was done by Naomi Stewart with help from Astha Singhal.

Preparation

Major tools

If you are looking for something on this list, and you cannot find it in the room, tell a manager. It should not have left the room and may be missing or stolen.

  • Singer Simple Model 3232

Minor tools

If you are looking for something on this list, and you cannot find it in the room, tell a manager. We can track it down and/or replace it.

  • Bobbin
  • Needles
  • Scissors
  • Pins

Consumables

If you are looking for something on this list, and you cannot find it in the room, tell a manager. We likely have more stock in storage.

  • Poly-fil
  • Thread
  • Fabric

Process

This is a very vague guide to how I began my project.

  • First I chose a fabric and traced the shape of the pillow I wanted to make. The fabric was folded so I could have two pieces of the same shape of fabric for my pillow. I traced this with a sharpie marker but I think we should get fabric markers for the crafting room.
  • Secondly, I cut out my two pieces of fabric. I cut them both out at the same time, then pinned them together so that I could begin hand sewing the first two sides. Note, two sides are to be hand-sewed and the other two sides will be done with the Singer Simple 3232. This gives us a little practice with two different methods of sewing.

Image Gallery

Naomi is still trying to get images that have been well sized but she does have photos