Router Table: Difference between revisions

From sandbox
Jump to navigation Jump to search
No edit summary
 
Line 12: Line 12:
<!-- This is for populating a list of all managers that have this tool as their adopted. -->
<!-- This is for populating a list of all managers that have this tool as their adopted. -->
{{#get_web_data:
{{#get_web_data:
  url=https://docs.google.com/spreadsheets/u/2/d/1OWqoa5hGArO427buM7213HOFsia-I8W9aUs01hW2Gpo/gviz/tq?tqx=out:csv&gid=0&tq=select%20F%20where%20G%20%3D%3D%20%22Router%20Table%22
  url=https://docs.google.com/spreadsheets/u/2/d/1OWqoa5hGArO427buM7213HOFsia-I8W9aUs01hW2Gpo/gviz/tq?tqx=out:csv&gid=0&tq=select%20F%20where%20G%20%3D%20%22Router%20Table%22
  |format=CSV with header
  |format=CSV
  |data=Manager=Adopter
  |data=Manager=1
}}
}}
{| class="wikitable sortable"
{| class="wikitable sortable"

Latest revision as of 23:44, 6 August 2020

JessEm Model: 09422 Router Table

Description

The router table is an essential tool for woodshops. The tool allows you to cut rabbets, put edge finishes and make moldings. The tool is helpful if you need to round over or chamfer the edges of your woodworking project. You can also cut slots into the material to make interlocking boxes or sliding shelving.

Training

Training is required to use this tool. The training module will be posted here.

Trained Managers

The managers that have adopted this tool and can help you with using. Keep in mind these are not the only managers that know how to use this tool, feel free to ask any. Full list of adopted tools can be found here here. Could not get URL https://docs.google.com/spreadsheets/u/2/d/1OWqoa5hGArO427buM7213HOFsia-I8W9aUs01hW2Gpo/gviz/tq?tqx=out:csv&gid=0&tq=select%20F%20where%20G%20%3D%20%22Router%20Table%22 after 3 tries.

Manager

Tips & Tricks

  • Always watch your fingers when using the tool, keep aways from the bit and use the finger safety guard whenever possible.
  • Unplug the router from the outlet when changing a cutting bit.
  • Check that the correct depth of the bit is set to avoid cutting too much/too little.
  • Wear safety glasses and gloves when using the tool.
  • Run the material opposite to the direction of the spinning bit to avoid kickback.

Manuals

A pdf copy of the manual can be viewed on the sandbox shared drive here.

Consumables

  • Bits - The primary consumable of this tool are cutting bits. Contact a manager in case a bit is broken/missing.