UltimakerChecklist

From sandbox
Revision as of 20:00, 9 November 2019 by Gfc (talk | contribs) (Created page with "==EVERYDAY 3D PRINTING CHECKLIST== ===When you have a model=== Have you checked to see if your model is error free? ===Slicing=== Did you start with default settings? If n...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

EVERYDAY 3D PRINTING CHECKLIST

When you have a model

Have you checked to see if your model is error free?

Slicing

Did you start with default settings? If not why not?

Does your model have a flat surface to place on the platform?

Did you place your model flat on the platform?

Does your model need support material?

If you need support, did you select Touching Build Plate or Everywhere? Do you want a raft, brim or skirt?

Are you printing "all at once" or "one at a time"?

Are you slicing for the right machine?

Did you slice for the right nozzle diameter?

Did you specify the layer height appropriately?

Did you specify the wall thickness and line count?

Did you specify an appropriate infill density?

Did you name your G-code file to associate your model with you?

Before you press print

Is the platform clean?

Is the platform level?

Do you have enough filament?

Is the type of filament you want on the printer? Do you have enough time to complete the print?

After you press print

Did you see the first few layers print before walking away?