Ultimaker S5: Difference between revisions
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
! Advantages | ! Advantages | ||
! Disadvantages | ! Disadvantages | ||
|+ [https://www.3dhubs.com/knowledge-base/introduction-fdm-3d-printing/#what Source] | |+ [https://www.3dhubs.com/knowledge-base/introduction-fdm-3d-printing/#what Source] [https://www.simplify3d.com/support/materials-guide/ Source] | ||
|- | |- | ||
| PLA | | PLA (Polyactic Acid) | ||
| | | | ||
| | * Doesn't contract much when cooling | ||
* Low Cost | |||
* Stiff/Good strength | |||
* Good Shelf life | |||
* Pleasant smell when printing | |||
* Biodegradable and from a sustainable process (Environmentally friendly) | |||
| | |||
* Degrades from humidity in ambient air | |||
* Low Heat resistance | |||
* Filament can be brittle and break | |||
* Not suitable for outdoors (sun exposure) | |||
* Not suitable for food storage (especially hot) | |||
|- | |- | ||
| ABS | | ABS | ||
| | | | ||
| | * Low cost | ||
* Good impact and wear resistence | |||
* Less oozing during printing, smoother finish | |||
* Good heat resistance | |||
* Durability and heat resistance makes good use for engineering parts | |||
| | |||
* Very easily warped | |||
* Needs heated bed or heated chamber | |||
* Pungent odor while printing (Use in a ventilated area) | |||
* Prints tend to shrink leading to dimensional inaccuracy | |||
|- | |- | ||
| Nylon (PA) | | Nylon (PA) | ||
Revision as of 15:43, 9 November 2019
Overview
The Ultimaker S5 is a high-end FDM (fused deposition modeling) 3D printer with dual extruders.
Fusion Deposition Modeling works by placing layers of melted material in a certain path over and over. Soon after the material is placed down, it hardens, allowing the next layer to be placed and stick on top. The path is determined by slicing an object and splitting it up into predetermined sized layers based on a setting in the editing software.
The Ultimaker's base software for creating images to be printed is Cura.
About Cura
- Cura can be found for free on Ultimaker's website: Cura Download
- Cura allows 3D file formats: 3MF, OBJ, STL or 2D file formats: bmp, gif, jpg, png.
- You can download Cura and prepare a print on you own computer and load it onto a flash drive for the Ultimaker
- Possible ways of getting objects to print:
- Finding and downloaded STL files from Thingiverse
- Create your own CAD files using a program like Solidworks, Siemens NX, Autodesk, or anything that will create the accepted file formats.
Choosing a Material
Each material that can be printed with have certain characteristics that allow them to be more desired than others in certain situations. Examples of qualities would be strength against breaking, temperature resistance, quality, ease, flexibility, and many more.
| Material Type | Advantages | Disadvantages |
|---|---|---|
| PLA (Polyactic Acid) |
|
|
| ABS |
|
|
| Nylon (PA) | row 2 cell 2 | row 2 cell 3 |
| PETG | row 2 cell 2 | row 2 cell 3 |
| TPU | row 2 cell 2 | row 2 cell 3 |
| PEI | row 2 cell 2 | row 2 cell 3 |