SecureShell: Difference between revisions

From UMIACS
Jump to navigation Jump to search
No edit summary
Line 80: Line 80:
|-
|-
|'''RHEL6'''
|'''RHEL6'''
|ssh-rsa, ecdsa-sha2-nistp256
|rsa (ssh-rsa), ecdsa (ecdsa-sha2-nistp256)
|-
|-
|'''RHEL7'''
|'''RHEL7'''
|ssh-rsa, ecdsa-sha2-nistp256, ssh-ed25519
|rsa (ssh-rsa), ecdsa (ecdsa-sha2-nistp256), ed25519 (ssh-ed25519)
|}
|}



Revision as of 15:36, 15 November 2017

Secure Shell (or SSH) is a network protocol allowing two computers to exchange data securely over an insecure network. By default, use of SSH brings the user to a terminal, but the protocol can be used for other types of data transfer such as SFTP and SCP.

Connecting to an SSH Server

Under Linux and macOS the following command from a terminal will connect a client computer to the UMIACS OpenLAB.

# ssh bkirz@openlab.umiacs.umd.edu

This will give you access to a terminal on any one of the OpenLAB servers. Note that by default you will not have access to applications that require X11 to run.

All UMIACS Windows hosts are installed with SSH Secure Shell Client. Alternatively, users can install these software on their personal machines:

Alternatively, all users can launch terminal sessions through the Juniper VPN web interface.

X11 Forwarding

By default, SSH only gives the user shell access to a host. Enabling X11 Forwarding allows users to run applications with Graphical User Interfaces.

Under Linux and macOS, the following command from a terminal will connect a client computer to the UMIACS OpenLAB using X11 Forwarding.

# ssh -Y bkirz@openlab.umiacs.umd.edu

Under macOS, xQuartz is required on the client machine to forward X sessions from the remote session.

If you do not have Cygwin, you will need to forward X through VcXsrv or Xming. First, enable X forwarding on your secure ssh client. The option is under tunneling in the ssh client settings, shown below. This only has to be done once.

File:SshXForward.jpg

Next, click save in the main ssh appication window to save this setting.

After this has been done, every time you want to use X forwarding, you need to make sure VcXsrv or Xming has been started (it will appear in your task tray) through the start menu programs. Now, you will be able to use Xwindow programs from your ssh client.

SSH Tunneling

You can tunnel one or more ports through an SSH connection such that your packets will look like they are coming from the host you are tunneling to. This is helpful for services that you would be normally blocked by a firewall.

Please see the SecureShellTunneling page for more information.

SSH Keys (and Passwordless SSH)

There are some situations where it is important to be able to ssh without entering a password. This is mostly required when working in clusters. This is done using ssh keys. Instead of authenticating with a password, ssh can use a pre-defined set of encryption keys to establish an authorized connection. To setup passwordless ssh, do the following.

First, you will need to create a ssh key pair. It is possible to use a password that you will need to enter at the beginning of your work session. This is preferable as it is more secure but may cause problems for some clustered work, particularly our TORQUE/MAUI clusters. If you simply hit [enter], you will never be prompted for a password when ssh'ing which can lead to security problems.

  1. To create a passwordless key, type the following, and then hit enter to place the keys in the default directory. NOTE: This is REQUIRED for our TORQUE/MAUI-based clusters!
      # ssh-keygen -N ""
    Alternatively, to create a passphrase-protected (more-secure) key, type the following. Do not use this option if you plan to use any of our TORQUE/MAUI-based clusters.
      # ssh-keygen
  2. This will produce two files, id_rsa and id_rsa.pub, the private and public keys, respectively. The default location will be ~/.ssh/. For the purposes of this tutorial we'll assume this default. Once you've created the keys, you will need to put them into place as follows:
 # chmod 700 ~/.ssh 
 # chmod 600 ~/.ssh/id_rsa 
 # touch ~/.ssh/authorized_keys2
 # chmod 600 ~/.ssh/authorized_keys2
 # cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys2
 # rm ~/.ssh/id_rsa.pub 
  • It is very important that you keep your private key secure! Ensure that it is chmod'd to 600 and that you do not put it anywhere visible to other users!
  • You must also make sure that no other users may write to your .ssh directory. This includes making sure that your home directory is not writable by group. Your home directory should be chmod'd to 750 or 700 to make sure of this. If the group write bit is set, your ssh keys WILL NOT WORK

If you did not select a passphrase when you generated your keys, you can now ssh without a password. If you did select a passphrase, you will need to activate the keys as follows:

 # ssh-agent [SHELL]
 # ssh-add -t [TIME]

In this case, "[SHELL]" is your preferred shell and "[TIME]" is the amount of time you'd like the key to be active in seconds. So, the following would start a bash shell with passwordless ssh active for 30 minutes:

 # ssh-agent bash
 # ssh-add -t 1800

You will be prompted for your passphrase and, when entered correctly, you will be able to ssh without entering a password.

To disable this functionality, simply delete your private key file (~/.ssh/id_rsa) and remove the public key from your ~/.ssh/authorized_keys2 file.

Verify remote host SSH fingerprint

The SSH protocol relies on host keys to verify the identify of a given host. Each host as a unique key for the various different protocols supported.

Key Support
RHEL6 rsa (ssh-rsa), ecdsa (ecdsa-sha2-nistp256)
RHEL7 rsa (ssh-rsa), ecdsa (ecdsa-sha2-nistp256), ed25519 (ssh-ed25519)

When connecting to a remove host for the first time, or when the remote host's local host key configuration has changed, you may see the following prompt:

$ ssh sabobbin@openlab
The authenticity of host 'openlab (128.8.132.247)' can't be established.
RSA key fingerprint is 25:83:aa:df:f5:ad:5f:08:c9:8a:a3:5d:97:8b:48:1f.
Are you sure you want to continue connecting (yes/no)?

It is considered best practice to verify the key fingerprint with the actual key of the host. UMIACS maintains a reference of SSH key fingerprints available at the following link: https://gitlab.umiacs.umd.edu/staff/ssh-fingerprints/blob/master/fingerprints

It is important to note that each key type has a different fingerprint. Depending on your local configuration, your client may prefer a specific type of key. The following commands can be used to determine the fingerprint of a given key type on a remote host:

$ ssh-keyscan -t rsa openlab.umiacs.umd.edu > key
# openlab.umiacs.umd.edu SSH-2.0-OpenSSH_7.4
$ ssh-keygen -l -f key
2048 25:83:aa:df:f5:ad:5f:08:c9:8a:a3:5d:97:8b:48:1f openlab.umiacs.umd.edu (RSA)

If you have any questions, or notice a discrepancy, please submit a request to staff@umiacs.umd.edu.

Windows / Putty Verification

Those who user putty to connect to remote hosts, the prompt will be similar to the following:

Putty ssh host key prompt.png

If the host key reported by putty matches the Documented entry for that host, it is safe to click 'yes'. If they do not match, please report the issue to staff@umiacs.umd.edu

Other Platforms

Long Running Processes

If you are dealing with a long running process that is inhibiting your ability to work regularly, you may want to run your processes inside a screen on the host that you're connecting to. This way, if the connection is dropped for any reason the screen session will automatically detach on the host and will continue running so that you can reattach it at a later time when you've connected again. Please see our documentation on GNU Screen for more information.

Further Information

OpenSSH

Windows Clients