Difference between revisions of "Windows Activation"
Revision as of 14:14, 4 June 2014
Please note that you need to be either on campus or on the VPN to activate. You may use either the UMIACS or the campus VPN. This tutorial also assumes you have already have a network connection established.
Windows 7 and 8 have a licensing model different from that of Windows XP. Unlike Windows XP, Windows 7/8 uses an activation model for each install. The installs will have to verify activation every 180 days. Activation and renewal is performed via the campus Key Management Server KMS, which is not available from off campus. For onsite desktops this is not a problem. However, for laptops it poses a potentially serious complication. As long as the laptop is periodically on the campus wireless, connects to the UMIACS or campus VPN, then renewal activation will be performed then.
Please note that your time must be correct for this to work, make sure you are in the East Coast timezone and your time is set via the internet, try running "w32tm /resync" on the command line
- Click the Windows button and type "CMD" in the run bar. ]
- Right-Click on the CMD button, and select "Run as Administrator" - THIS IS VERY IMPORTANT!
- From the link here, choose the appropriate key for your windows version. That for windows 7 Enterprise is used in the example below (line 2)
- Select "Yes" when it asks if you want to allow the following program to make changes.
- From the commmand prompt, run these commands in order, replacing the key in line 2with the appropriate key:
cscript c:\windows\system32\slmgr.vbs -skms kms.umd.edu:1688 cscript c:\windows\system32\slmgr.vbs -ipk 33PXH-7Y6KF-2VJC9-XBBR8-HVTHH cscript c:\windows\system32\slmgr.vbs -ato
After these commands have run, the Key Management Server should have activated your windows computer.
If you are unable to activate, please see the message at the top of this page and contact UMIACS staff with information about your problem.