ULS VLS 6.60 Laser Cutter: Difference between revisions

From sandbox
Jump to navigation Jump to search
Line 20: Line 20:
===Laser Radiation===
===Laser Radiation===


The danger of injury from laser radiation is very low when correctly operated. Our laser cutters are classified as Class 1 laser devices, meaning they are considered safe for use in a non-industrial environment without eye protection. This certification indicates that the machines have safety mechanisms intended to ensure the hazardous Class 4 laser inside the machine cannot emit dangerous laser radiation. In other words, the safety implied by a Class 1 certification is only accurate when the device is operated with all safety interlocks functioning and all doors and covers in place.
The danger of injury from laser radiation is very low when correctly operated with all safety interlocks in place. It is never permitted to operate a laser cutter with any interlock bypassed to override a safety feature. While our laser cutters protect your vision from laser radiation, the cutting process does produce an intense light. Looking at this bright light for extended periods of time can cause damage to your vision.
 
It is never permitted to operate a laser cutter with any interlock bypassed to override a safety feature.
 
While our laser cutters protect your vision from laser radiation, the cutting process does produce an intense light. Looking at this bright light for extended periods of time can cause damage to your vision.


==Training==
==Training==

Revision as of 17:18, 31 October 2019

This page is currently under construction.

Universal Laser Systems VLS 6.60 Laser Cutter


Description

The Universal Laser Systems VLS 6.60 is a laser cutter / engraver

Safety Concerns

The laser cutter is one of the least dangerous tools in the sandbox when used properly by properly trained makers following our SOPs and cutting only approved materials. Used improperly, laser cutters present several serious risks that need to be understood by all makers. The most important safety concerns specific to laser cutter use are:

Fire

In normal use a laser cutter is able to cut and engrave combustible materials such as wood and paper with little risk of fire. If the ventilation systems aren’t working correctly small flare ups may occur. Scraps from earlier jobs can increase risk of fire. Fire safety is discussed in the training.

Fumes

It is critical that you are aware of what materials you are using in the laser and understand the potential for some materials to create irritating, harmful, and potentially lethal by-products of combustion. The laser ventilation system is important but is not designed for the evacuation of hazardous fumes and is not a substitute for identification of unsafe materials. If staff is unable to identify a material as laser-safe you will not attempt to use it in our laser cutters.

Laser Radiation

The danger of injury from laser radiation is very low when correctly operated with all safety interlocks in place. It is never permitted to operate a laser cutter with any interlock bypassed to override a safety feature. While our laser cutters protect your vision from laser radiation, the cutting process does produce an intense light. Looking at this bright light for extended periods of time can cause damage to your vision.

Training

Use of this tool requires the completion of a safety and usage training module. This training may be found on the Sandbox Canvas course In this module If this link does not work for you, ensure that you are enrolled in the course by going to ter.ps/Learn2Make and clicking on the 'Join this Course' or 'Enroll' button.

Self-training via this wiki, user manuals, or other sources is encouraged but does not substitute for the online training module. Students found using this tool without completing the Canvas training module are subject to disciplinary action which may include termination of Sandbox access.

Tips & Tricks

Accessories

  • Rotary Accessory
  • Focus Gauge
  • Thickness Gauge

Manuals

Manufacturer's Web Site

ULS VLS 6.60 Platform

Specifications

  • Laser Power: 60 Watts
  • Laser Material Processing Area (W x H): 32 x 18 in (813 x 457 mm)
  • Maximum Part Size (W x H x D): 37 x 23 x 9 in (940 x 584 x 229 mm)
  • Rotary Capacity Max Diameter: 8 in (203 mm)
  • Motorized Z Axis Lifting Capacity 40 lbs (18 kg)
  • Available Focus Lenses
    • 2.0 in (50 mm)
    • HPDFO™ (High Power Density Focusing Optics)
  • Laser Platform Interface Panel Five button keypad
  • Computer Requirements Requires dedicated PC with Windows® 7/8/10 32/64 bit and one available USB port (2.0 or higher)
  • Optics Protection Available with Optional Air Assist
  • Cabinet Style Free-Standing
  • Overall Dimension (W x H x D) 44 x 39 x 36 in (1118 x 991 x 914 mm)
  • Weight 325 lbs (147 kg)
  • Power Requirements
    • 110V/10A
    • 220V-240V/5A
  • Exhaust Requirements
    • Two 4 in (102 mm) ports
    • 500 CFM @ 6 in static pressure (850 m3/hr at 1.5 kPa)
Retrieved from "https://wiki.umiacs.umd.edu/sandbox/index.php?title=ULS_VLS_6.60_Laser_Cutter&oldid=585"