IRB 1223

Prototyping Studio

The Prototyping Studio is located in Iribe Room 1223. The color code of this room is BLUE.

Standard Operating Procedures / Training

The tools in this studio require training before use. All who use these tools must follow all Sandbox Standard Operating Procedures (SOPs) as provided in the ELMS/Canvas training module for that tool as well as the SOP notes listed on each tool's wiki page linked below.

Hazard Warnings for Prototyping Studio

• No Food or Drink - No food or drink is allowed in this studio

• Safety Data Sheets

Major tools

If you are looking for something on this list, and you cannot find it in the room, tell a manager. It should not have left the room and may be missing or stolen.

• ULS VLS 6.60 Laser Cutter - Universal Laser Systems VLS 6.60 Laser Cutter
• Ultimaker_S5 - Ultimaker S5 FDM 3D Printer.
• Formlabs_Form_2 - FormLabs Form 2 SLA 3D Printer [Not yet operational]

Minor tools

If you are looking for something on this list, and you cannot find it in the room, tell a manager. We can track it down and/or replace it.

• Digital Thickness Gauge
• Hobby knife
• Putty knife
• Ruler
• Flush cutter
• Formlabs_Wash_&_Cure - FormLabs Wash & Cure Stations [Not yet operational]

Consumables

If you are looking for something on this list, and you cannot find it in the room, tell a manager. We likely have more stock in storage.

• 5mm plywood
• 2.85mm PLA filament
• Isopropyl alcohol
• Nitrile gloves
• Dish soap
• Hand soap
• Shop towels
• Lens cleaning wipes
• Cotton swabs