Nexus
The Nexus is the combined scheduler of resources in UMIACS. The resource manager for Nexus is SLURM. Resources are arranged into partitions where users are able to schedule computational jobs. Users are arranged into a number of SLURM accounts based on faculty, lab, or center investments.
Getting Started
All accounts in UMIACS are sponsored. If you don't already have a UMIACS account, please see Accounts for information on getting one. You need a full UMIACS account (not a collaborator account) in order to access Nexus.
Access
Your access to submission nodes (alternatively called login nodes) for Nexus computational resources is determined by your account sponsor's department, center, or lab affiliation. You can log into the UMIACS Directory CR application and select the Computational Resource (CR) in the list that has the prefix nexus. The Hosts section lists your available submission nodes - generally a pair of nodes of the format nexus<department, lab, or center abbreviation>[00,01], e.g., nexusgroup00 and nexusgroup01.
Note - UMIACS requires multi-factor authentication through our Duo instance. This is completely discrete from both UMD's and CSD's Duo instances. You will need to enroll one or more factors to access resources in UMIACS, and will be prompted to enroll when you log into the Directory application for the first time.
Once you have identified your submission nodes, you can SSH directly into them. From there, you are able to submit to the cluster via our SLURM workload manager. You need to make sure that your submitted jobs have the correct account, partition, and qos.
Jobs
SLURM jobs are submitted by either srun or sbatch depending if you are doing an interactive job or batch job, respectively. You need to provide the where/how/who to run the job and specify the resources you need to run with.
For the who/where/how, you may be required to specify --account, --partition, and/or --qos (respectively) to be able to adequately submit jobs to the Nexus.
For resources, you may need to specify --time for time, --ntasks for CPUs, --mem for RAM, and --gres=gpu for GPUs in your submission arguments to meet your requirements. There are defaults for all four, so if you don't specify something, you may be scheduled with a very minimal set of time and resources (e.g., by default, NO GPUs are included if you do not specify --gres=gpu). For more information about submission flags for GPU resources, see here. You can also can run man srun on your submission node for a complete list of available submission arguments.
For a list of available GPU types on Nexus and their specs, please see Nexus/GPUs.
For details on how the network for Nexus is architected, please see Nexus/Network. This can be important if you wish to optimize performance of your jobs.
Interactive
Once logged into a submission node, you can run simple interactive jobs. If your session is interrupted from the submission node, the job will be killed. As such, we encourage use of a terminal multiplexer such as Tmux.
$ srun --pty --ntasks=4 --mem=2gb --gres=gpu:1 bash srun: Job account was unset; set to user default of 'nexus' srun: Job partition was unset; set to cluster default of 'tron' srun: Job QoS was unset; set to association default of 'default' srun: Job time limit was unset; set to partition default of 60 minutes srun: job 1 queued and waiting for resources srun: job 1 has been allocated resources $ hostname tron62.umiacs.umd.edu $ nvidia-smi -L GPU 0: NVIDIA GeForce RTX 2080 Ti (UUID: GPU-daad6a04-a2ce-1183-ce53-b267048f750a)
Batch
Batch jobs are scheduled with a script file with an optional ability to embed job scheduling parameters via variables that are defined by #SBATCH lines at the top of the file. You can find some examples in our SLURM/JobSubmission documentation.
Partitions
The SLURM resource manager uses partitions to act as job queues which can restrict size, time and user limits. The Nexus has a number of different partitions of resources. Different Centers, Labs, and Faculty are able to invest in computational resources that are restricted to approved users through these partitions.
Partitions usable by all non-class account users:
- Nexus/Tron - Pool of resources available to all non-class accounts sponsored by either UMIACS or CSD faculty.
- Scavenger - Preemption partition that supports nodes from multiple other partitions. More resources are available to schedule simultaneously than in other partitions, however jobs are subject to preemption rules. You are responsible for ensuring your jobs handle this preemption correctly. The SLURM scheduler will simply restart a preempted job with the same submission arguments when it is available to run again. For an overview of things you can check within scripts to determine if your job was preempted/resumed, see SLURM/Preemption. Only contains x86_64 architecture nodes.
- Scavenger (aarch64) - Preemption partition identical in design to scavenger, but only contains aarch64 architecture nodes.
Partitions usable by ClassAccounts:
- Class - Pool of resources available to class accounts sponsored by either UMIACS or CSD faculty.
Partitions usable by specific lab/center users:
- Nexus/CBCB - CBCB lab pool available for CBCB lab members.
- Nexus/CLIP - CLIP lab pool available for CLIP lab members.
- Nexus/CML - CML lab pool available for CML lab members.
- Nexus/GAMMA - GAMMA lab pool available for GAMMA lab members.
- Nexus/MBRC - MBRC lab pool available for MBRC lab members.
- Nexus/MC2 - MC2 lab pool available for MC2 lab members.
- Nexus/Vulcan - Vulcan lab pool available for Vulcan lab members.
Quality of Service (QoS)
SLURM uses Quality of Service (QoS) both to provide limits on job sizes (termed by us as "job QoS") as well as to limit resources used by all jobs running in a partition, either per user or per group (termed by us as "partition QoS").
Job QoS
Job QoS are used to provide limits on the size of job that you can run. You should try to allocate only the resources your job actually needs, as resources that each of your jobs schedules are counted against your fair-share priority in the future.
- default - Default job QoS. Limited to 4 CPU cores, 1 GPU, and 32GB RAM per job. The maximum wall time per job is 3 days.
- medium - Limited to 8 CPU cores, 2 GPUs, and 64GB RAM per job. The maximum wall time per job is 2 days.
- high - Limited to 16 CPU cores, 4 GPUs, and 128GB RAM per job. The maximum wall time per job is 1 day.
- scavenger - No resource limits per job, only a maximum wall time per job of 3 days. You are responsible for ensuring your job requests multiple nodes if it requests resources beyond what any one node is capable of. 576 total CPU cores, 72 total GPUs, and 2304GB total RAM are permitted simultaneously across all of your jobs running with this job QoS. This job QoS is paired 1-1 with the scavenger partition. To use this job QoS, include
--partition=scavengerand--account=scavengerin your submission arguments. Do not include any job QoS argument other than--qos=scavenger(optional) or submission will fail. - scavenger-aarch64 - No resource limits per job, only a maximum wall time per job of 3 days. You are responsible for ensuring your job requests multiple nodes if it requests resources beyond what any one node is capable of. 1600 total CPU cores and 281140MB total RAM are permitted simultaneously across all of your jobs running with this job QoS. This job QoS is paired 1-1 with the scavenger-aarch64 partition. To use this job QoS, include
--partition=scavenger-aarch64,--account=scavenger, and--qos=scavenger-aarch64in your submission arguments.
You can display these job QoS from the command line using the show_qos command. By default, the command will only show job QoS that you can access. The above four job QoS are the ones that everyone can access.
$ show_qos
Name MaxWall MaxTRES MaxJobsPU MaxTRESPU
-------------------- ----------- ------------------------------ --------- ------------------------------
default 3-00:00:00 cpu=4,gres/gpu=1,mem=32G
high 1-00:00:00 cpu=16,gres/gpu=4,mem=128G
medium 2-00:00:00 cpu=8,gres/gpu=2,mem=64G
scavenger 3-00:00:00 cpu=576,gres/gpu=72,mem=2304G
scavenger-aarch64 3-00:00:00 cpu=1600,mem=281140M
If you want to see all job QoS, including those that you do not have access to, you can use the show_qos --all command.
$ show_qos --all
Name MaxWall MaxTRES MaxJobsPU MaxTRESPU
-------------------- ----------- ------------------------------ --------- ------------------------------
cml-cpu 7-00:00:00 8
cml-default 7-00:00:00 cpu=4,gres/gpu=1,mem=32G 2
cml-high 1-12:00:00 cpu=16,gres/gpu=4,mem=128G 2
cml-high_long 14-00:00:00 cpu=32,gres/gpu=8 8 gres/gpu=8
cml-medium 3-00:00:00 cpu=8,gres/gpu=2,mem=64G 2
cml-scavenger 3-00:00:00 gres/gpu=24
cml-very_high 1-12:00:00 cpu=32,gres/gpu=8,mem=256G 8 gres/gpu=12
default 3-00:00:00 cpu=4,gres/gpu=1,mem=32G
high 1-00:00:00 cpu=16,gres/gpu=4,mem=128G
highmem 21-00:00:00 cpu=128,mem=2T
huge-long 10-00:00:00 cpu=32,gres/gpu=8,mem=256G
interactive 12:00:00 cpu=4,mem=128G
medium 2-00:00:00 cpu=8,gres/gpu=2,mem=64G
oasis-exempt 10-00:00:00 cpu=160,mem=28114M
scavenger 3-00:00:00 cpu=576,gres/gpu=72,mem=2304G
scavenger-aarch64 3-00:00:00 cpu=1600,mem=281140M
vulcan-cpu 2-00:00:00 cpu=1024,mem=4T 4
vulcan-default 7-00:00:00 cpu=4,gres/gpu=1,mem=32G 2
vulcan-exempt 7-00:00:00 cpu=32,gres/gpu=8,mem=256G 2
vulcan-high 1-12:00:00 cpu=16,gres/gpu=4,mem=128G 2
vulcan-high_long 14-00:00:00 cpu=32,gres/gpu=8 8 gres/gpu=8
vulcan-medium 3-00:00:00 cpu=8,gres/gpu=2,mem=64G 2
vulcan-sailon 3-00:00:00 cpu=32,gres/gpu=8,mem=256G gres/gpu=48
vulcan-scavenger 3-00:00:00 cpu=32,gres/gpu=8,mem=256G
To find out what accounts and partitions you have access to, first use the show_assoc command to show your account/job QoS combinations. Then, use the scontrol show partition command and note the AllowAccounts entry for each listed partition. You are able to submit to any partition that allows an account that you have. If you need to use an account other than the default account nexus, you will need to specify it via the --account submission argument.
Partition QoS
Partition QoS are used to limit resources used by all jobs running in a partition, either per user (MaxTRESPU) or per group (GrpTRES).
To view partition QoS, use the show_partition_qos command.
$ show_partition_qos
Name MaxSubmitPU MaxTRESPU GrpTRES
-------------------- ----------- ------------------------------ --------------------
scavenger 500 cpu=576,gres/gpu=72,mem=2304G
scavenger-aarch64 500 cpu=1600,mem=281140M
tron 500 cpu=32,gres/gpu=4,mem=256G
If you want to see all partition QoS, including those that you do not have access to, you can use the show_partition_qos --all command.
$ show_partition_qos --all
Name MaxSubmitPU MaxTRESPU GrpTRES
-------------------- ----------- ------------------------------ --------------------
cbcb 500 cpu=1228,mem=48003G
cbcb-heng 500
cbcb-interactive 500
class 500 cpu=32,gres/gpu=4,mem=256G
clip 500 cpu=564,mem=5590G
cml 500 cpu=1096,mem=10890G
cml-cpu 500
cml-furongh 500
cml-scavenger 500 gres/gpu=24
cml-wriva 500
cml-zhou 500
gamma 500 cpu=616,mem=5204G
mbrc 500 cpu=240,mem=2345G
mc2 500 cpu=312,mem=3092G
oasis 500
quics 500 cpu=328,mem=3484G
scavenger 500 cpu=576,gres/gpu=72,mem=2304G
scavenger-aarch64 500 cpu=1600,mem=281140M
tron 500 cpu=32,gres/gpu=4,mem=256G
vulcan 500 cpu=1272,mem=11710G
vulcan-ampere 500
vulcan-cpu 500
vulcan-ramani 500
vulcan-scavenger 500
NOTE: These QoS cannot be used directly when submitting jobs, with the exception of the scavenger QoS (i.e., they are not in the AllowQos field for their respective partition). Partition QoS limits apply to all jobs running on a given partition, regardless of what job QoS is used.
For example, in the default non-preemption partition (tron), you are restricted to 32 total CPU cores, 4 total GPUs, and 256GB total RAM at once across all jobs you have running in the partition.
Lab/group-specific partitions may also have their own user limits, and/or may also have group limits on the total number of resources consumed simultaneously by all users that are using their partition, codified by the line in the output above that matches their lab/group name. Note that the values listed above in the two "TRES" columns are not fixed and may fluctuate per-partition as more resources are added to or removed from each partition.
All partitions also only allow a maximum of 500 submitted (running (R) or pending (PD)) jobs per user in the partition simultaneously. This is to prevent excess pending jobs causing backfill issues with the SLURM scheduler.
- If you need to submit more than 500 jobs in batch at once, you can develop and run an "outer submission script" that repeatedly attempts to run an "inner submission script" (your original submission script) to submit jobs in the batch periodically, until all job submissions are successful. The outer submission script should use looping logic to check if you are at the max job limit and should then retry submission after waiting for some time interval.
- An example outer submission script is as follows. In this example,
example_inner.shis your inner submission script and is not an array job, and you want to run 1000 jobs. If your inner submission script is an array job, adjust the number of jobs accordingly. Array jobs must be of size 500 or less.
#!/bin/bash
numjobs=1000
i=0
while [ $i -lt $numjobs ]
do
while [[ "$(sbatch example_inner.sh 2>&1)" =~ "QOSMaxSubmitJobPerUserLimit" ]]
do
echo "Currently at maximum job submissions allowed."
echo "Waiting for 5 minutes before trying to submit more jobs."
sleep 300
done
i=$(( $i + 1 ))
echo "Submitted job $i of $numjobs"
done
It is suggested that you run the outer submission script in a Tmux session to keep the terminal window executing it from being interrupted.
Storage
All network storage available in Nexus is currently NFS based, and comes in a few different flavors. Compute nodes also have local scratch storage that can be used.
Home Directories
You have 30GB of home directory storage available at /nfshomes/<username>. It has both Snapshots and Backups enabled.
Home directories are intended to store personal or configuration files only. We encourage you to not share any data in your home directory. You are encouraged to utilize our GitLab infrastructure to host your code repositories.
NOTE: To check your quota on this directory, use the command df -h ~.
Scratch Directories
Scratch data has no data protection including no snapshots and the data is not backed up. There are two types of scratch directories in the Nexus compute infrastructure:
- Network scratch directories
- Local scratch directories
Please note that class accounts do not have network scratch directories.
Network Scratch Directories
You are allocated 200GB of scratch space via NFS from /fs/nexus-scratch/<USERNAME> where <USERNAME> is your UMIACS username. It is not backed up or protected in any way. This directory is automounted; you will need to cd into the directory or request/specify a fully qualified file path to access it.
You can view your quota usage by running df -h /fs/nexus-scratch/<USERNAME>.
You may request a permanent increase of up to 400GB total space without any faculty approval by contacting staff. If you need space beyond 400GB, you will need faculty approval and/or a project allocation for this. If you choose to increase your scratch space beyond 400GB, the increased space is also subject to the 270 TB days limit mentioned in the project allocation section before we check back in for renewal. For example, if you request 1.4TB total space, you may have this for 270 days (1TB beyond the 400GB permanent increase). The amount increased beyond 400GB will also count against your faculty member's 20TB total storage limit mentioned below.
This file system is available on all submission, data management, and computational nodes within the cluster.
Local Scratch Directories
Each computational node that you can schedule compute jobs on also has one or more local scratch directories. These are always named /scratch0, /scratch1, etc. and are not backed up or protected in any way. These directories are almost always more performant than any other storage available to the job as they are mounted from disks directly attached to the compute node. However, you must stage your data within the confines of your job and extract the relevant resultant data elsewhere before the end of your job.
These local scratch directories have a tmpwatch job which will delete unaccessed data after 90 days, scheduled via maintenance jobs to run once a month during our monthly maintenance windows. Please make sure you secure any resultant data you wish to keep from these directories at the end of your job.
Faculty Allocations
Each faculty member can be allocated 1TB of permanent lab space upon request. We can also support grouping these individual allocations together into larger center, lab, or research group allocations if desired by the faculty. Please contact staff to inquire.
Lab space storage is fully protected. It has snapshots enabled and is backed up nightly.
Project Allocations
Project allocations are available per user for 270 TB days; you can have a 1TB allocation for up to 270 days, a 3TB allocation for 90 days, etc..
A single faculty member can not have more than 20TB of project allocations across all of their sponsored accounts active simultaneously. Network scratch allocation space increases beyond the 400GB permanent maximum also have the increase count against this limit (i.e., a 1TB network scratch allocation would have 600GB counted towards this limit).
Project storage is fully protected. It has snapshots enabled and is backed up nightly.
The maximum allocation length you can request is 540 days (500GB space) and the maximum storage space you can request is 9TB (30 day length).
To request an allocation, please contact staff with the faculty member(s) that the project is under involved in the conversation. Please include the following details:
- Project Name (short)
- Description
- Size (1TB, 2TB, etc.)
- Length in days (270 days, 135 days, etc.)
- Other user(s) that need to access the allocation, if any
These allocations are available via /fs/nexus-projects/<project name>. Renewal is not guaranteed to be available due to limits on the amount of total storage. Near the end of the allocation period, staff will contact you and ask if you are still in need of the storage allocation. If renewal is available, you can renew for up to another 270 TB days with reapproval from the original faculty approver.
- If you are no longer in need of the storage allocation, you will need to relocate all desired data within two weeks of the end of the allocation period. Staff will then remove the allocation.
- If you do not respond to staff's request by the end of the allocation period, staff will make the allocation temporarily inaccessible.
- If you do respond asking for renewal but the original faculty approver does not respond within two weeks of the end of the allocation period, staff will also make the allocation temporarily inaccessible.
- If one month from the end of the allocation period is reached without both you and the faculty approver responding, staff will remove the allocation.
Datasets
We have read-only dataset storage available at /fs/nexus-datasets. If there are datasets that you would like to see curated and available, please see this page.
The list of Nexus datasets we currently host can be viewed here.